SLIDE 443 MC Motor
SLIDE 443 MC 12V dc sliding gate opener motor case with electronic board
Ideal for small light duty residential gates up to 400kg
Ensures long lasting performances in all weather condition.
- 1x SLIDE443MC 12V DC motor case with toroidal transformer, electronic board CTH43 featuring Soft Stop, on-board radio receiver (rolling coded)
- 2 x Magnetic limits
- 1 pair of keys for emergency manual unlocking
Soft Start, Soft Stop
DUCO SAFE technology Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be added to prevent scratches to the painting of vehicles crossing while gate is closing.In compliance with EN norms EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 200
ASR (Autimatic Reversal System)
Thanks to the integrated amperometrical detection system and direction sensor, the opener is provided with an automatic reversal system in case the gate reaches an obstacle, the opener stops immediately and reverses automatically. Highest safety is ensured.
- Ideal for a safe, quick and easy installation: the system is electrocution risk-free.
- Low consumption technology: only 0,007A stand-by consumption! reduces waste of energy, save money. Ensure long lasting autonomous use ad reliability. Ideal for intensive continuous use
- Integrated solar panel & battery management: the control board is ready to operate autonomously.
- can work by rechargeable back-up battery for autonomous use in case of power failure. ( require Adding a battery charger modul item CMBAT 2.0 + a 12V 7A battery
- Ideal for a safe, quick and easy installation: the system works in DC current and is electrocution risk-free.
- 2 working modes: "STEP by STEP" ( push to open & push to close) or Automatic close with adjustable time (you can vary the pause time from 1 to 100 seconds)
- Motor housing with integrated battery housing compartment: can fit any 12V battery up to maximal dimension : 9cm x 15cm x 6,5cm + CMABT 2.0 battery charger module
- Easy self-storing of the remotes controls by pushing one button
- Adjustable motor power/ obstacle detection sensibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.
- Pedestrian opening (partial opening of one the gate to allow pedestrian crossing only) this feature can be controlled by remote control or wired command
- Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
- After sale service and assistance provided directly by manufacturer without intermediaries in order to provide quick and immediate solution to any demand.
- The gate is automatically locked in closed position (irreversible system).
- Manual release system by key
- Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
- Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
- Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
SLIDE 443 M 12V Motor Technical Data
Motor power supply | 12V dc |
dc motor power | 140W |
maximum thrust | 1000N |
Speed | 10m/min |
Gate weight length up to | 400 kg |
Operating temperature | 20°C/+60°C |
Maximum duty cycle | continuous use |
Magnetic limits | √ |
CTH46 ELECTRONIC BOARD TECHNICAL DATA
Main AC power supply | 230V (110V on demand) |
System Operating Voltage | 12V |
Stand-by consumption | 0.007A |
Protection fuse on board | √ |
Transformer protection fuse | 0.8A T(1.2A T) |
Toroidal transformer wattage | 105W |
Radio receiver | 2 channels rolling code |
Radio codes storage capacity | 10 |
Radio transmission protocol | DUCATI rolling code 433MHz |
Radio remote codes learning | self-learning |
On board antenna | √ |
Input external antenna | √ |
Automatic closing pause time | √ adjustable by trimmer 1-100 sec |
DUCOSAFE Safety obstacle detection system (entrapment protection) | √ |
Motor power adjustment by potentiometer | √ |
ARS automatic reverse system on obstacle detection | √ |
SOFT STOP Double speed with soft stop | √ |
Electric Limits | √ magnetic |
Safety photocells input | √ NC clean contact |
START operating cycle (full cycle) input | NO clean contact |
START operating cycle (pedestrian cycle) input | NO clean contact |
Emergency STOP contact | √ NC clean contact |
Blinker output | 12V up to 10W |
Compatible with emergency Back-up battery | √ only by adding the complementary CMBAT 2.0 battery charger +one 12V 7A battery |
CLICK HERE to download the SLIDE instruction manual
CLICK HERE To watch the SLIDE collection product Video
BAT 0712
accessories
- 12V 7A lead-acid sealed battery Extra slim model
- Lead acid Capacity: 7Ah Volts: 12 Dimensions 6,5cm W x 15cm L x 9 cm H
CMBAT 2.0 (New version!)
accessories
- Battery charger module New Version (December 2022) with Upgraded charge controller to be also used to manage the recharge of the battery by a solar panel
- Compatible with electronic board model CTH42, CTH41, ( swing gate opener) & CTH43 ( sliding gate opener)
LASER 7120
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- This model features Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances
PLAK 8700
accessories
- Fixing plate with motor position adjustment system Compatible with SLIDE sliding gate opener Material : Stainless steel
PULT 6203 N
accessories
- New design DUCATI's rolling coded 2 buttons remote control
- Safeguards your home with DUCATI's unique rolling code system which sends a new code every time you click your remote control
PULT 6208 (Rolling)
accessories
- New rolling coded 4 buttons remote control with it's unique changing code
RACK 8612
accessories
- Additional rack for sliding gate opener Lenght 0,5m each
- Material : Hostaform® Module: M4
RACK 8622
accessories
- Additional rack for sliding gate opener (New supply from 2021) Length 0,5m each Material : Nylon with Iron core Module: M4
RIXY 6040 R
accessories
- Rolling Coded 4 channels radio receiver
- Storage capacity up to 30 remote controls buttons each channel for a total storage capacity of 100 remote controls
SW 7120
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- This model features Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances
SW6500
accessories
- Radio rolling coded 1 channel KEYPAD With this radio key pad you can open your gate from a distance of 30m by digiting a 4 digit secret combination