CTH43V (12/24V)

CHOOSE PRODUCT VARIANT
€ 118.00EUR

Shipment/TAX are calculated to Check Out and depends on delivery address

Electronic board for 12V or 24V sliding gate openers, featuring SOFT STOP
Compatible with SLIDE and Tower gate openers.
Stops on on magnetic limits detection.

 

MOTOR COMPATIBILITY:

Compatible with  24V versions of Sliding gate opener model 
  • SLIDE series: SLIDE 843 / SLIDE 1043  (24V versions only) 
  • TOWER series: TWB800 / TWB1000 / TWA800 / TWB1000

    ACCESSORIES COMPATIBILITY:

    • DUCATI's rolling coded remote controls
    • key switch or and any switch button / loop detector with NO contact (normally open contact)
    • 12V photocells NC contact
    • 12/24V 10W max bulb blinker
    • External aerial antenna
    • CMBAT  ( external module to connect emergency back-up battery / solar panel
    • 12V battery: warning requires CMBAT +  12V battery  ( note: in case of  main ac power supply and   power by back up battery, the 24V motor versions will work at  slow speed only)
    • 12 V min. 210W photovoltaic solar panel (12V motors only)
    • GSM 996 module to operate your gate by mobile phone
    • GSM INTERCOM 1096 for both intercom communication directly on your mobile phone and to operate your gate by mobile phone)

        DUCO SAFE technology Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells  are an optional accessory that can be added to prevent scratches to the painting of vehicles crossing while gate is closing.In compliance with EN norms EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 200

        SOFT STOP

        • The opener stops in both directions decreasing the speed and avoiding unwished banging closing.
        • This prevent from usury and ensure long life to your opener and door.
        • This function prevents the door banging closing

        ASR (Automatic Reversal System)

        Thanks to the integrated amperometrical detection system and direction sensor, the opener is provided with an automatic reversal system in case the gate reaches an obstacle, the opener stops immediately and reverses automatically. Highest safety is ensured.

        • Features double speed with SOFT STOP.  This feature is very important  to guarantee an optimal motion control and a gentle stop. Ideal for very heavy or highly sliding gates, controls the force of inertia of the gate, preventing kickback.
        • Stand-buy consumption: 0,014A only.
        • Can work independently in case of power failure: by adding the external battery charger module CMBAT* and a 2x 12V battery*. (* optionals)
        • Can  be also powered by solar panel by adding  1 module CMBAT* + 2x 12A 12V batteries in series connected (BAT1212)+ 1 solar panel 24V min. 20W*(SOLAR2024)

        Features 2 working mode options: Automatic closing with adjustable time (you can vary the pause time from 1 to 100 seconds) or step-by-step ( push to open & push to close)

        Easy self-storing of the remotes controls by pushing one button

        Adjustable motor power/ obstacle detection sensitibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.

        Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing only) this feature can be controlled by remote control or switch button

         

        CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request.

        Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be added to prevent scratches to the painting of vehicles crossing while gate is closing.In compliance with EN norms EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)

        Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid

        Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.

        CTH43V (12/24V) ELECTRONIC BOARD TECHNICAL DATA

        Main AC power supply
          230V (110V on demand
        System Operating Voltage
        24V or 12V
        Backup-up battery & power supply
        √ with CMBAT
        Solar module power supply
        √ (12V motor version only)
        Stand-by consumption
        0.012A
        Protection fuse on board
        √ 
        Transformer protection fuse
        0.8A T ( 1.2A T)
        Toroidal transformer wattage
        105W
        Radio receiver
        2 channels rolling code
        Radio codes storage capacity
        10
        Radio transmission protocol
        DUCATI rolling code 433MHz
        Radio remote codes learning
        self-learning
        On board antenna
        Input external antenna
        Automatic closing pause time
        √ adjustable by trimmer 1-100 sec
        DUCOSAFE Safety obstacle detection system (entrapment protection)
        Motor power adjustment by potentiometer
        ARS automatic reverse system on obstacle detection
        SOFT STOP Double speed with soft stop
        FAST extra speed motor
        Electric Limits
        √ magnetic
        Safety photocells input
        √ NC contact
        START operating cycle (full cycle) contact
        √  NO contact
        START operating cycle (pedestrian cycle) contact
         
        √ NO contact
        Blinker output
        12V/24V 10W max 
        Battery charger
        not on board  (requires CMBAT)
        Battery input
        not on board  (
        requires additional CMBAT)
        output for optional additional back-up battery charge management & module CMBAT
        Low battery indication by flashing light blinker
        -
        Solar panel input *
        compatible with 12V motors only (requires additional CMBAT)
        LED to indicate power ON

         

        CLICK HERE to download the SLIDE  instruction manual

        CLICK HERE To watch the SLIDE collection product Video

        Electronic board CTH43V Wiring diagram:

        cth43V/24

         

        Related Products

        X

         

          BUY MORE PAY LESS

        Get 10% OFF Buy over 300€ Coupon code

        Get 15% OFF Buy over 500€ Coupon code

        Get 20% OFF Buy over 1000€ Coupon code


        * RESTRICTIONS: COUPON CODE DOES NOT APPLY FOR THE DEAL OF THE DAY.