HC619 SOLAR

CHOOSE PRODUCT VARIANT
€ 499.00EUR

Shipment/TAX are calculated to Check Out and depends on delivery address

Ideal for 2 wings swing gates up to 3m/10ft each wing  

(total gate length up to 6m/20ft)

 This classic DUCATI  "vintage" design gate operator features SOLAR POWER power supply for 100% autonomous use.

Several advanced options combined with 600mm long stroke actuators for greater strength and less mechanical stress of the system.

in FC version  also offer buit-in mechanical limit for gate open and closed position. Ideal where  otherwise required end stop limits cannot be installed on the ground to set the gate open and closed position

LEARN MORE about reduced consumption technology....

LEARN MORE about our solar powered openers....

    Ensures 100% autonomous use even where AC power is unavailable

    Highly reliable as featured with Ducati's reduced consumption technology: with only 7mA stand-by consumption ensures long lasting performances in all weather condition.  Ideal for residential use. Up to 50 cycles daily guaranteed . No additional modules requires: it's all included: on board solar panel & battery recharge management!

       

      DUCO SAFE

      obstacle detection safety system guarantees maximal safety of use to your family

      SELF LOCK TECHNOLOGY

      The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation

      • 2x HC618- 600mm stroke electromechanical actuators supplied with 1 m outdoor use cable H05RN-F 2 x 1mmq
      • set of actuator's fixing brackets
      • 1x KONTROL 7857  large control box with electronic board CTH44, integrated solar panel and battery management, toroidal transformer, integrated radio receiver.Note: the control box  is  designed to  be powered by solar panel, but can also be powered by  main AC power  mantaining wired the battery. the transformer is therefore supplied for Ac power supply wring if required by the customer for any reason and can also be used to recharge the battery
      • 2x 6203Roll - 2 buttons 433,92 Mhz  rolling code radio transmitters
      • 1x HC7500 - blinking light 12V ( 24V for 24V variant)
      • 1x SW5000 - key switch
      • 1x key for manual emergency release
      • 1x BAT0712 Battery 12V 7A
      • 1x SOLAR1012 Solar photovoltaic panel 12V 10W with fixing bracket
      • 1x instruction manual
      •  
      • POWERFUL  600mm stroke electromechanical actuators
      •  Ideal for a safe, quick and easy installation: the system is electrocution risk-free.
      • Low consumption technology: only 0,007A stand-by consumption! reduces waste of energy, save money Ensure long lasting autonomous use ad reliability. up to 40 daily cycles guaranteed even in worst winter weather.
      • Integrated solar panel & battery management: the control board is ready to operate autonomously. 
      • Ideal for a safe, quick and easy  installation: the system works in DC current and is electrocution risk-free. 
      • 2 working modes: "STEP by STEP" ( push to open & push to close) or Automatic close with adjustable time (you can vary the pause time from 1 to 100 seconds) 
      • Control unit with integrated battery housing compartment: can fit any 12v battery up to maximal dimension : 9cm x 15cm x 9,5cm h
      • Easy  self-storing  of the remotes controls by pushing one button
      • Adjustable motor power/ obstacle detection sensitibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy:  just need to rotate  potentiometer related to each motor.
      • Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) this feature can be controlled by remote control 
      • Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
      • After sale service and assistance provided directly by manufacturer without intermediaries in order to provide quick and immediate solution to any demand.
      • The gate is automatically locked in closed position (irreversibile system).
      • Manual release system by universal triangular key
      • Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells  are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)  
      • CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
      • Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
      • Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
      • Integrated solar panel management: the card is a just ready to operate autonomously powered by solar panel. NOTE: For 12V version add a standard 12V battery + 1 x 12V min.10W solar panel. For 24V version add  2 x 12V batteries in series connected + 24V min. 20W solar panel. No extra module needed 
      • Low consumption technology: only 0,007A stand-by consumption for the 12V version and only 0,014A !  Protect the environment, reduces waste of energy and  gives long lasting autonomy with battery /solar panel use
      • Adjustable motor power/ obstacle detection sensitivity. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy:  just need to rotate  potentiometer related to each motor.
      • heavy duty opener: can work in continuous cycles  without overheating
      • Adjustment of the time lag between the two doors
      • Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) can be controlled by remote control or wired control.
      • Made in Italy - All components are manufactured in the company to warranty high  quality and reliability.
      • After sale service and assistance provided directly by manufacturer without intermediaries
      • Easy  self-storing  of the remotes controls by pushing one button
      • Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells  are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)    
      • CE conformity: product certified on all points of the current European 

      ACTUATOR  TECHNICAL DATA

      ELECROMECHANICAL ACTUATOR HC618

       
      Motor power supply
       
      12V 
      dc motor  60W 
      max pushing & power 1200N 
      Stroke 600mm
      motor speed 1,5 cm/sec
      electromechanical actuator
      working cycles limit continuous use/ no limits
      working temperature -20°C/+50°C
      max wing length 3m/each leaf
      max.wing weight 
      (24V version)
      300kg/ each leaf
      max. opening angle 137°
      automatic wing lock  √ irreversible actuator
      manual release system √ by triangular key
      Max "C" measure (see pillar installation diagram hereunder) to install the actuator avoiding any masonry work on the pillar 23 cm
      Compatible with  gate opening towards outside

      NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model HC618 in "FC" version are featured with on-board mechanical limits for the open & closed  wing position.

       

      CTH44 ELECTRONIC BOARD TECHNICAL DATA 

      (solar panel & battery management on board) 

       
      Main power supply
       
      By 12V solar module + 12V battery or by main AC power + 12V battery. Note: the control box is always supplied with an additional toroidal transformer 230-240V /50-60Hz or (110V/60Hz). Select the desired version while ordering)
      toroidal transformer's Watts 105W
      protection fuse √10AF
      transformer protection fuse 0,8AT (1,2AT for 110V transformer)
      use on single or double wing gate
      output services 12V
      stand-by power consumption 7mA
      radio receiver 2 channels (one for full cycle opening, the second for pedestrian access/partial 1 wing opening)
      remote controls channels storage capacity 10 codes
      radio transmission protocol DUCATI rolling code
      radio frequency 433,92MHz
      remote control automatic learning
      on board antenna
      external antenna input
      automatic closure working mode √ with adjustable pause time up to 100 sec.
      step by step working √ one pulse to open; one pulse to close
      motor power adjustment √ by potentiometer
      Obstacle detection safety system (DUCO SAFE) obstacle detection
      In compliance with EU-CE norms
      timerized courtesy light output -
      flashing light output √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening
      electric lock output -
      safety beam-photocells input (NC contact) √ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120
      A full cycle START input (NO contact)
      pedestrian cycle START input ( N contact) -

      CLICK HERE to download the SW400T actuator's installation diagram

      CLICK HERE  to download the CTH44 electronic board wiring diagram

      CTH 44 VIDEO  installation manual

      CLICK HERE to download full swing gate openers installation manual

      CLICK HERE to download the general instruction manual

      HC618 actuator installation diagram

       

       

      Customer Reviews

      Based on 1 review Write a review

      Related Products

      X

       

        BUY MORE PAY LESS

      Get 10% OFF Buy over 300€ Coupon code

      Get 15% OFF Buy over 500€ Coupon code

      Get 20% OFF Buy over 1000€ Coupon code


      * RESTRICTIONS: COUPON CODE DOES NOT APPLY FOR THE DEAL OF THE DAY.