SW7000
Ducati's entry level package.
Double wing swing gate up to 2 x 2m/6,5ft each wing (Total gate length up to 4m/13ft)
- Ducati's modern design DC gate opener
- featuring DUCO SAFE: obstacle detection safety system guarantees maximal safety of use to your family. Original Made in Italy.
- For those who desire a very uncomplicated gate opener, easy to be installed
- Ideal for double wing swing gate
- 2xSW400 - 400mm stroke linear actuators
- 1x7855Rol - large control box with electronic board CTH42+ transformer
- 2x 6203Roll - 2 buttons 433 Mhz rolling code transmitters
- 1x SW7500 - blinking light 12V
- 1x SW5000 - key switch
- 1 set of actuators fixing plates
- 1x instruction manual
This classic DUCATI "vintage" design ENTRY LEVEL gate operator features middle level functions for an easy installation with a good range of adjustments availables
AUTO-LOCK TECHNOLOGY
The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation
For those who do not require advanced settings but want a safe, reliable simple gate opener for small gates:
AUTO-LOCK TECHNOLOGY
The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation
DUCO SAFE
Obstacle detection safety system guarantees maximal safety of use to your family
- Telescopic actuators ensure long-lasting performances and less stress on gate hinges
- Ideal for a safe, quick, and easy installation: the system works in DC current and is electrocution risk-free.
- Possibility of connecting an external timed courtesy light (example: garden light)
- 2 working modes: "STEP by STEP" ( push to open & push to close) or Automatic close with adjustable time (you can vary the pause time from 1 to 100 seconds)
- Control unit with integrated battery housing compartment: can fit any 12v battery up to maximal dimension : 9cm x 15cm x 9,5cm h
- Can work independently in case of power failure: by adding the external battery charger module C/M/BAT *and a 12V battery*. ( * = are not included in this package and must be added to the kit)
- Easy self-storing of the remotes controls by pushing one button
- Adjustable motor power/ obstacle detection sensibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate the potentiometer related to each motor.
- Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) this feature can be controlled by remote control or wired control (for example by a key switch)
- Made in Italy - All components are manufactured by the company to warranty high quality and reliability.
- After-sale service and assistance provided directly by manufacturer without intermediaries in order to provide a quick and immediate solution to any demand.
- The gate is automatically locked in the closed position (irreversible system).
- Manual release system by universal triangular key
- Safety is ensured by a sensitive amperometric obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
- Totally in house designed software and hardware are focused on reducing energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High-quality radio receiver hybrid
- Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
ACTUATOR TECHNICAL DATA
ELECROMECHANICAL ACTUATOR SW400
|
|
|
| dc motor | 60W |
| max pushing & power | 1200N |
| Stroke | 400mm |
| motor speed | 1,5 cm/sec |
| telescopic actuator | - |
| working cycles limit | continuous use/ no limits |
| working temperature | -20°C/+50°C |
| max wing length | 2m/6.5ft each leaf |
| max.wing weight | 200kg/441lb each leaf |
| max. opening angle | 125° |
| automatic wing lock | √ irreversible actuator |
| manual release system | √ by triangular key |
| Compatible with gate opening towards outside | √ |
NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model SW400 in "FC" version are featured with on-board mechanical limits for the open wing position.
CTH42 ELECTRONIC BOARD TECHNICAL DATA
|
|
|
| toroidal transformer's Watts | 105W |
| protection fuse | Automatic |
| transformer protection fuse | 0,8AT (1,2AT for 110V transformer) |
| use on single or double wing gate | 2 Wings gate only |
| output services | 12V |
| stand-by power consumption | 8mA |
| radio receiver | 1 channel |
| remote controls channels storage capacity | 10 codes |
| radio transmission protocol | DUCATI rolling code |
| radio frequency | 433,92MHz |
| remote control automatic learning | √ |
| On board antenna | √ |
| external antenna input | - |
| automatic closure working mode | √ with adjustable pause time up to 30 sec. |
| step by step working | √ one pulse to open; one pulse to close |
| motor power adjustment | - |
| Obstacle detection safety system(DUCO SAFE) | obstacle detection |
| In compliance with EU-CE norms | √ |
| timerized courtesy light output | - |
| flashing light output | √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening |
| electric lock output | - |
| safety beam-photocells input (NC contact) | √ NC normally closed contact |
| A full cycle START input(NO contact) | √ |
| pedestrian cycle START input ( N contact) | - |
| output for optional additional back-up battery charge management & module CMBAT | - |
CLICK HERE to download the SW400 actuator's installation diagram
CLICK HERE to download the CTH42 electronic board wiring diagram
CLICK HERE to download full swing gate openers installation manual
Customer Reviews
CMBAT 2.0 (New version!)
accessories
- Battery charger module New Version (December 2022) with Upgraded charge controller to be also used to manage the recharge of the battery by a solar panel
- Compatible with electronic board model CTH42, CTH41, ( swing gate opener) & CTH43 ( sliding gate opener)
LASER 100
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- Universal model Also called Photo Eye Sensor / Photocells Compatibility : Universal model Sensing range: 12 m
RIXY 6040 R
accessories
- Rolling Coded 4 channels radio receiver
- Storage capacity up to 30 remote controls buttons each channel for a total storage capacity of 100 remote controls
STILO 6023
accessories
Universal external antenna 433,92 MHz To be installed directly on FLASH blinkers Comes with cable Improves the reception of the command transmitted from the remote control. It's recommended in case the...
STILO 6025
accessories
- Universal external antenna 433,92 MHz can be fastened to the wall or directly on the vertical pillar comes with 5m long cable and fixing bracket
