MORE YOU BUY MORE YOU SAVE Learn More

BUY NOW, PAY LATER, NO FEES   Select at Checkout

x

Automatic Gate Openers, Garage Door Openers and French Window Shuttered Doors
CHOOSE PRODUCT VARIANT
€ 559.00EUR

Shipment/TAX are calculated to Check Out and depends on delivery address

  • For 2-leaf swing gates up to 3m max 300 kg per leaf
  • Total independence from the electricity grid. up to 50 maneuver cycles per day
  • In the FC version, it offers double integrated mechanical limit switches, ideal if you do not have ground stops
  • The solution for open / closed gate
  • For gate that opens inwards or outwards
  • With electromechanical motors of 12V cc stroke 600mm
  • Control unit with a good range of adjustments available
  • DUCO SAFE: the anti-pressure obstacle safety system complies with EU standards
  • ECOLOGICAL: energy saving. absorption in stand-by: only 0.007 A

Ideal for 2 wings swing gates up to 3m/10ft each wing  

(total gate length up to 6m/20ft)

 This classic DUCATI  "vintage" design gate operator features SOLAR POWER power supply for 100% autonomous use.

Several advanced options combined with 600mm long stroke actuators for greater strength and less mechanical stress of the system.

in FC version  also offer buit-in mechanical limit for gate open and closed position. Ideal where  otherwise required end stop limits cannot be installed on the ground to set the gate open and closed position

LEARN MORE about reduced consumption technology....

LEARN MORE about our solar powered openers....

Ensures 100% autonomous use even where AC power is unavailable

Highly reliable as featured with Ducati's reduced consumption technology: with only 7mA stand-by consumption ensures long lasting performances in all weather condition.  Ideal for residential use. Up to 50 cycles daily guaranteed . No additional modules requires: it's all included: on board solar panel & battery recharge management!

DUCO SAFE

obstacle detection safety system guarantees maximal safety of use to your family

SELF LOCK TECHNOLOGY

The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation


  • 2x HC618- 600mm stroke electromechanical actuators supplied with 1 m outdoor use cable H05RN-F 2 x 1mmq
  • set of actuator's fixing brackets
  • 1x KONTROL 7857  large control box with electronic board CTH44, integrated solar panel and battery management, toroidal transformer, integrated radio receiver.Note: the control box  is  designed to  be powered by solar panel, but can also be powered by  main AC power  mantaining wired the battery. the transformer is therefore supplied for Ac power supply wring if required by the customer for any reason and can also be used to recharge the battery
  • 2x 6203Roll - 2 buttons 433,92 Mhz  rolling code radio transmitters
  • 1x HC7500 - blinking light 12V ( 24V for 24V variant)
  • 1x SW5000 - key switch
  • 1x key for manual emergency release
  • 1x BAT0712 Battery 12V 7A
  • 1x SOLAR1012 Solar photovoltaic panel 12V 10W with fixing bracket
  • 1x instruction manual

  • POWERFUL  600mm stroke electromechanical actuators
  • Ideal for a safe, quick and easy installation: the system is electrocution risk-free.
  • Low consumption technology: only 0,007A stand-by consumption! reduces waste of energy, save money Ensure long lasting autonomous use ad reliability. up to 40 daily cycles guaranteed even in worst winter weather.
  • Integrated solar panel & battery management: the control board is ready to operate autonomously.
  • Ideal for a safe, quick and easy  installation: the system works in DC current and is electrocution risk-free. 
  • 2 working modes: "STEP by STEP" ( push to open & push to close) or Automatic close with adjustable time (you can vary the pause time from 1 to 100 seconds)
  • Control unit with integrated battery housing compartment: can fit any 12v battery up to maximal dimension : 9cm x 15cm x 9,5cm h
  • Easy  self-storing  of the remotes controls by pushing one button
  • Adjustable motor power/ obstacle detection sensitibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy:  just need to rotate  potentiometer related to each motor.
  • Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) this feature can be controlled by remote control 
  • Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
  • After sale service and assistance provided directly by manufacturer without intermediaries in order to provide quick and immediate solution to any demand.
  • The gate is automatically locked in closed position (irreversibile system).
  • Manual release system by universal triangular key
  • Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells  are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)  
  • CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
  • Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
  • Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
  • Integrated solar panel management: the card is a just ready to operate autonomously powered by solar panel. NOTE: For 12V version add a standard 12V battery + 1 x 12V min.10W solar panel. For 24V version add  2 x 12V batteries in series connected + 24V min. 20W solar panel. No extra module needed 
  • Low consumption technology: only 0,007A stand-by consumption for the 12V version and only 0,014A !  Protect the environment, reduces waste of energy and  gives long lasting autonomy with battery /solar panel use
  • Adjustable motor power/ obstacle detection sensitivity. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy:  just need to rotate  potentiometer related to each motor.
  • heavy duty opener: can work in continuous cycles  without overheating
  • Adjustment of the time lag between the two doors
  • Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) can be controlled by remote control or wired control.
  • Made in Italy - All components are manufactured in the company to warranty high  quality and reliability.
  • After sale service and assistance provided directly by manufacturer without intermediaries
  • Easy  self-storing  of the remotes controls by pushing one button
  • Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells  are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)    
  • CE conformity: product certified on all points of the current European 

ACTUATOR  TECHNICAL DATA

ELECROMECHANICAL ACTUATOR HC618

 
Motor power supply
 
12V 
dc motor  60W 
max pushing & power 1200N 
Stroke 600mm
motor speed 1,5 cm/sec
electromechanical actuator
working cycles limit continuous use/ no limits
working temperature -20°C/+50°C
max wing length 3m/each leaf
max.wing weight 
(24V version)
300kg/ each leaf
max. opening angle 137°
automatic wing lock  √ irreversible actuator
manual release system √ by triangular key
Max "C" measure (see pillar installation diagram hereunder) to install the actuator avoiding any masonry work on the pillar 23 cm
Compatible with  gate opening towards outside

NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model HC618 in "FC" version are featured with on-board mechanical limits for the open & closed  wing position.

 

CTH44 ELECTRONIC BOARD TECHNICAL DATA 

(solar panel & battery management on board) 

 
Main power supply
 
By 12V solar module + 12V battery or by main AC power + 12V battery. Note: the control box is always supplied with an additional toroidal transformer 230-240V /50-60Hz or (110V/60Hz). Select the desired version while ordering)
toroidal transformer's Watts 105W
protection fuse √10AF
transformer protection fuse 0,8AT (1,2AT for 110V transformer)
use on single or double wing gate
output services 12V
stand-by power consumption 7mA
radio receiver 2 channels (one for full cycle opening, the second for pedestrian access/partial 1 wing opening)
remote controls channels storage capacity 10 codes
radio transmission protocol DUCATI rolling code
radio frequency 433,92MHz
remote control automatic learning
on board antenna
external antenna input
automatic closure working mode √ with adjustable pause time up to 100 sec.
step by step working √ one pulse to open; one pulse to close
motor power adjustment √ by potentiometer
Obstacle detection safety system (DUCO SAFE) obstacle detection
In compliance with EU-CE norms
timerized courtesy light output -
flashing light output √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening
electric lock output -
safety beam-photocells input (NC contact) √ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120
A full cycle START input (NO contact)
pedestrian cycle START input ( N contact) -

CLICK HERE to download the HC618 actuator's installation diagram

CLICK HERE  to download the CTH44 electronic board wiring diagram

CTH 44 VIDEO  installation manual

CLICK HERE to download full swing gate openers installation manual


Customer Reviews

Based on 2 reviews Write a review
LASER 100

LASER 100

accessories

  • Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC  SENSORS
  • Universal model Also called Photo Eye Sensor / Photocells  Compatibility : Universal model Sensing range: 12 m
€ 26.00EUR
More Info
LASER 7120

LASER 7120

accessories

  • Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
  • This model features  Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances
€ 99.00EUR
More Info
RIXY 6040 R

RIXY 6040 R

accessories

  • Rolling Coded 4 channels radio receiver
  • Storage capacity up to 30 remote controls buttons each channel for a total storage capacity of 100 remote controls
€ 99.00EUR
More Info
STILO 6023

STILO 6023

accessories

Universal external antenna 433,92 MHz   To be installed directly on FLASH blinkers Comes with  cable Improves the reception of the command transmitted from the remote control. It's recommended in case the...

€ 25.00EUR
More Info
SW 7120

SW 7120

accessories

  • Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
  • This model features  Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances
€ 89.00EUR
More Info