EVO 742 BASIC 2.0
Ideal for double wing gate up to 4m/350kg
(total gate length up to 8
The perfect heavy duty gate opener.
Comes with powerful 500mm long stroke motor
Ideal for residential & commercial use
DUCO SAFE
obstacle detection safety system guarantees maximal safety of use to your family
SELF LOCK TECHNOLOGY
The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation
- 2x EVO 700 500mm stroke 12V electromechanic irreversible actuators supplied with 1 m outdoor use cable H05RN-F 2 x 1mmq
- set of multi-position actuator's fixing brackets
- 1x KONTROL 7855 large control box with electronic board CTH42, toroidal transformer, integrated radio receiver
- 2x Ducati rolling code radio transmitters
- 1x - blinking light
- 1x key for manual emergency release
- 1x instruction manual
- Can work independently in case of power failure: by adding the external battery charger module C/M/BAT 2.0 *and a 12V battery*. ( * = are not included in this package and must be added to the kit)
- Automatic closing with adjustable time (you can vary the pause time from 1 to 100 seconds) or step-by-step ( push to open/ push to close)
- Adjustable motor power/ obstacle detection sensivity. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.Status Warning light output: an external wired LED light can be connected to indicate if the gate is open, closed, closing or opening
- Ideal for a safe, quick and easy installation: the system is electrocution risk-free.
- heavy duty opener: can work in continuous cycles without overheating
- Possibility of connecting an external timed courtesy light (example: garden light)
- Pedestrian opening (1 partial opening the wing to allow the pedestrian crossing only) can be controlled by remote control or wired control.
- Possibility of connecting an external timed courtesy light (example: garden light)
- The gate is automatically locked in closed position ( irreversibile system).
- Electro-lock is not needed, but recommended for wing longer than 2,8m each. This opener is compatible with ac 12V electric-lock ( WARNING: electrolock with booster are required in case the opener is powered by back-up battery)
- Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
- After sale service and assistance provided directly by manufacturer without intermediaries
- Easy self-storing of the remotes controls by pushing one button
- Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
- Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
- Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
-
Manual release system by universal triangular key
ACTUATOR TECHNICAL DATA
ELECROMECHANICAL TELESCOPIC ACTUATOR EVO 700
|
|
dc motor (24V version) | 120W (240W) |
max pushing & power | 2400N (4800N) |
Stroke | 500mm |
motor speed (24V version) | 1,5mm (2cm/sec) |
telescopic actuator | - |
working cycles limit | continuous use/ no limits |
working temperature | -20°C/+50°C |
max wing length | 4m each |
max.wing weight (24V version) | 250kg each leaf ( 350kg each) |
max. opening angle | 137° |
automatic wing lock | √ irreversible actuator |
manual release system | √ by triangular key |
Compatible with gate opening towards outside | √ |
NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model in "FC" version are featured with on-board mechanical limits for the open & closed wing position.
CTH42 ELECTRONIC BOARD TECHNICAL DATA
|
|
toroidal transformer's Watts | 105W |
protection fuse | √10AF |
transformer protection fuse | 0,8AT (1,2AT for 110V transformer) |
use on single or double wing gate | √ |
output services | 12V |
stand-by power consumption | 12mA |
radio receiver | 2 channels ( 1 for full cycle opening, 1 for pedestrian access- partial 1 wing opening) |
remote controls channels storage capacity | 10 codes |
radio transmission protocol | DUCATI rolling code |
radio frequency | 433,92MHz |
remote control automatic learning | √ |
On board antenna | √ |
external antenna input | √ |
automatic closure working mode | √ with adjustable pause time up to 100 sec. |
step by step working | √ one pulse to open; one pulse to close |
motor power adjustment | √ by potentiometer |
Obstacle detection safety system(DUCO SAFE) | obstacle detection |
In compliance with EU-CE norms | √ |
timerized courtesy light output | √ max 10W 12V lamp |
flashing light output | √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening |
electric lock output | √ ac(warning the electric lock is incompatible with/while the board is powered by back-up battery) |
safety beam-photocells input (NC contact) | √ NC normally closed contact |
A full cycle START input(NO contact) | √ |
pedestrian cycle START input ( N contact) | √ |
output for optional additional back-up battery charge management & module CMBAT | √ |
CLICK HERE to download the general instruction manual
CTH42 Manual electronic board
6203Roll remote control instructions
EVO700 click to download installation diagram
Customer Reviews
LASER 7120
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- This model features Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances
RIXY 6040 R
accessories
- Rolling Coded 4 channels radio receiver
- Storage capacity up to 30 remote controls buttons each channel for a total storage capacity of 100 remote controls
STILO 6023
accessories
Universal external antenna 433,92 MHz To be installed directly on FLASH blinkers Comes with cable Improves the reception of the command transmitted from the remote control. It's recommended in case the...
SW 7120
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- This model features Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances