HC812-300 SOLAR MONO
Ideal for single swing gate opener up to 2,5m/8ft
Ducati's classic vintage design gate opener featuring:
This classic DUCATI "vintage" design gate operator features several advanced options combined with telescopic actuators for greater strength and less mechanical stress of the system.
LEARN MORE about reduced consumption technology....
LEARN MORE about our solar powered openers....
- 1x HC312 - 300mm stroke 12V electromechanical irreversible telescopic actuator with fixing brackets
- 1x 7857 - large control box with electronic board & transformer. Radio receiver on board + on board solar panel and battery management. Note: the control box is designed to be powered by solar panel, but can also be powered by main AC power maintaining wired the battery. the transformer is therefore supplied for Ac power supply wring if required by the customer for any reason and can also be used to recharge the battery.
- 2x 6203Roll - 2 buttons 433 Mhz rolling code transmitters
- 1x HC7500 - blinking light 12V
- 1x SW5000 - key switch
- 1x SOLAR 1012 solar panel 12V 10W with fixing arch
- 1x BAT0712 12V 7A battery
- 1x key for manual emergency release
* Starting from 01/04/2022, due to the difficulties in sub-supplying of some components, the vendor reserve the right to supply the product with these modifications:
- the transformer could be replaced by a battery charger
- the electronic board model could be replaced by a different model substantially equivalent to the one listed on the website
DUCO SAFE
obstacle detection safety system guarantees maximal safety of use to your family
SELF LOCK TECHNOLOGY
The self-locking properties of the spindle increase the protection against a dangerous and unauthorised “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation
- Ideal for a safe, quick and easy installation: the system works in DC current and is electrocution risk-free.
- Possibility of connecting an external timed courtesy light (example: garden light)
- 2 working modes: "STEP by STEP" ( push to open & push to close) or Automatic close with adjustable time (you can vary the pause time from 1 to 100 seconds)
- Control unit with integrated battery housing compartment: can fit any 12v battery up to maximal dimension : 9cm x 15cm x 9,5cm h
- Easy self-storing of the remotes controls by pushing one button
- Adjustable motor power/ obstacle detection sensitibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.
- Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) this feature can be controlled by remote control or wired control (for example by a key switch)
- Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
- After sale service and assistance provided directly by manufacturer without intermediaries in order to provide quick and immediate solution to any demand.
- The gate is automatically locked in closed position (irreversibile system).
- Electro-lock is not needed, but recommended for wing longer than 2,8m each. This opener is compatible with ac 12V electric-lock ( WARNING: electrolock is not compatible in case the opener is powered by back-up battery)
- Manual release system by universal triangular key
- Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
- Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
- Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
ACTUATOR TECHNICAL DATA
ELECROMECHANICAL TELESCOPIC ACTUATOR HC312
|
|
dc motor | 60W |
max pushing & power | 1200N |
Stroke | 300mm |
motor speed | 1,5 cm/sec |
telescopic actuator | √ |
working cycles limit | continuous use/ no limits |
working temperature | -20°C/+50°C |
max wing length | 2,5m/8ft |
max.wing weight | 250kg/550lb |
max. opening angle | 125° |
automatic wing lock | √ irreversible actuator |
manual release system | √ by triangular key |
Compatible with gate opening towards outside | √ |
NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical stop limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model HC312 in "FC" version are featured with on-board mechanical limits for the open wing position.
CTH44 ELECTRONIC BOARD TECHNICAL DATA
(solar panel & battery management on board)
|
|
toroidal transformer's Watts | 105W |
protection fuse | √10AF |
transformer protection fuse | 0,8AT (1,2AT for 110V transformer) |
use on single or double wing gate | √ |
output services | 12V |
stand-by power consumption | 7mA |
radio receiver | 2 channels (one for full cycle opening, the second for pedestrian access/partial 1 wing opening) |
remote controls channels storage capacity | 10 codes |
radio transmission protocol | DUCATI rolling code |
radio frequency | 433,92MHz |
remote control automatic learning | √ |
on board antenna | √ |
external antenna input | √ |
automatic closure working mode | √ with adjustable pause time up to 100 sec. |
step by step working | √ one pulse to open; one pulse to close |
motor power adjustment | √ by potentiometer |
Obstacle detection safety system (DUCO SAFE) | obstacle detection |
In compliance with EU-CE norms | √ |
timerized courtesy light output | - |
flashing light output | √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening |
electric lock output | - |
safety beam-photocells input (NC contact) | √ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120 |
A full cycle START input (NO contact) | √ |
pedestrian cycle START input ( N contact) | - |
CLICK HERE to download the general instruction manual
HC312 actuator installation diagram
CLICK HERE to download the CTH44 electronic board wiring diagram
CLICK HERE for CTH 44 VIDEO installation manual
Customer Reviews
BAT 0712
accessories
- 12V 7A lead-acid sealed battery Extra slim model
- Lead acid Capacity: 7Ah Volts: 12 Dimensions 6,5cm W x 15cm L x 9 cm H
CMBAT 2.0 (New version!)
accessories
- Battery charger module New Version (December 2022) with Upgraded charge controller to be also used to manage the recharge of the battery by a solar panel
- Compatible with electronic board model CTH42, CTH41, ( swing gate opener) & CTH43 ( sliding gate opener)
RIXY 6040 R
accessories
- Rolling Coded 4 channels radio receiver
- Storage capacity up to 30 remote controls buttons each channel for a total storage capacity of 100 remote controls
SW6500
accessories
- Radio rolling coded 1 channel KEYPAD With this radio key pad you can open your gate from a distance of 30m by digiting a 4 digit secret combination