CTH44
Electronic board for Solar powered double or single 12V swing gate opener. 100% autonomous use
- deal for automating a gate where the power supply is unavailable, but it is also good and recommended as an intelligent alternative to the existing power grid connection. It allows you to maximize your autonomy and savings: it simplifies and reduces installation costs and saves up to € 100* on annual electricity bills. (*average annual electrical cost of most of the standard gate openers available on the market)
- Highly reliable as featured with Ducati's low consumption technology FULLSOL: with only 0,007 stand-by consumption ensures long lasting performances in all weather condition. Up to 50 cycles daily guaranteed even by poor light, with a simple 12V 7A battery + 12V 10w photovoltaic solar panel. No additional modules requires: it's all included: on board solar panel & battery recharge management!
- Helps protecting our planet for future generations. by using a renewable energy source it contributes to the preservation of the planet and the reduction of the consumption of fossil fuels harmful to the environment.
- Featuring DUCO SAFE: obstacle detection safety system guarantees maximal safety of use to your family
- Comes with DUCATI's rolling coded radio transmission ( on board radio receiver & antenna cable).
MOTOR COMPATIBILITY:
- compatible with all DUCATI's 12V actuators
ACCESSORIES COMPATIBILITY:
- DUCATI's rolling coded remote controls,
- GSM rModule
- keyswitch or and any switch button / loop detector with NO contact (normally open contact)
- 12V battery
- 12V low consumption photocells model 7120
- 12V min. 10W photovoltaic solar panel
- 12V 10W max bulb blinker
- external aerial antenna
- Features 2 working mode options: Automatic closing with adjustable time (you can vary the pause time from 1 to 100 seconds) or step-by-step ( push to open & push to close)
- Easy self-storing of the remotes controls by pushing one button
- Adjustable motor power/ obstacle detection sensibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.
- Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing only) this feature can be controlled by remote control only
- On board integrated photovoltaic solar panel power supply management ( no extra modules needed) the solar panel can be directly wired to the CTH44 electronic board
- On board integrated battery charge management (no extra modules needed) the battery can be directly wired to the CTH44 electronic board
- A connection to the toroidal transformer is available in order to be allow to recharge the battery from the main ac power supply( 220V/110V) or even to power the CTH44 by electrical grid (only keeping the back-up battery connected). Warning if 230V/110V main power supply is chosen, do not connect a solar panel
- Solar panel alignment help system (LED and acoustic guide to find the ideal position of the solar panel)
- Photocells alignment help system (LED and acoustic guide to find the ideal position of the solar panel)
- Battery status monitoring system with LED (red LED = battery out; yellow LED = battery discharged; green LED = battery charging. "Warning: while testing the battery status, disconnect the solar panel)
- The CTH44 is designed to be powered by standard solar panels and batteries that are easily available on the market so it does not impose costly standard battery use: a we do not use customized expensive batteries
- CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
- Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be added to prevent scratches to the painting of vehicles crossing while gate is closing. In compliance with EN norms EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
CTH44 ELECTRONIC BOARD TECHNICAL DATA
(solar panel & battery management on board)
|
|
12V ( by solar panel+ Battery or in case of emergency by main AC power supply + back-up battery)
|
| protection fuse | √10AF |
| use on single or double wing gate | √ |
| output services | 12V |
| stand-by power consumption | 7mA |
| radio receiver | 2 channels ( 1 for full cycle opening, 1 for pedestrian access- partial 1 wing opening) |
| remote controls channels storage capacity | 10 codes |
| radio transmission protocol | DUCATI rolling code |
| radio frequency | 433,92MHz |
| remote control automatic learning | √ |
| On board antenna | √ |
| external antenna input | √ |
| automatic closure working mode | √ with adjustable pause time up to 100 sec. |
| step by step working | √ one pulse to open; one pulse to close |
| motor power adjustment | √ by turning potentiometer clockwise you increase motor power and decrease obstacle detection sensibility |
| Obstacle detection safety system (DUCO SAFE). In case an obstacle is detected during the maneuver,the gate will immediately stop preventing injuries. | √ amperometrical obstacle detection |
| In compliance with EU-CE norms | √ |
| timerized courtesy light output | - |
| flashing light output | √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening |
| electric lock output | - |
| safety beam-photocells input (NC contact) | √ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120 |
| A full cycle START input (NO contact) | √ |
| pedestrian cycle START input (NO contact) | - (can be only controlled by radio remote control) |
BAT 0712
accessories
- 12V 7A lead-acid sealed battery Extra slim model
- Lead acid Capacity: 7Ah Volts: 12 Dimensions 6,5cm W x 15cm L x 9 cm H
€ 35.00EUR
BAT 1212
accessories
- 12V 12A lead-acid sealed battery Extra slim model
- Lead acid Capacity: 12Ah Volts: 12 Dimensions 10cm W x 15cmL x 9 cm H
€ 49.00EUR
KONTROL 7857
CONTROL BOX
Description Ducati's SOLAR control box for 100% autonomous use double or single swing gate openers (12V) Ideal for residential use and ensures 100% autonomous use even where AC power is unavailable. Highly...
€ 217.00EUR
LASER 100
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- Universal model Also called Photo Eye Sensor / Photocells Compatibility : Universal model Sensing range: 12 m
€ 26.00EUR
LASER 7120
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- This model features Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances
€ 99.00EUR
RIXY 6040 R
accessories
- Rolling Coded 4 channels radio receiver
- Storage capacity up to 30 remote controls buttons each channel for a total storage capacity of 100 remote controls
€ 99.00EUR
SW6500
accessories
- Radio rolling coded 1 channel KEYPAD With this radio key pad you can open your gate from a distance of 30m by digiting a 4 digit secret combination
€ 79.00EUR
SW7120
Pair of ultra thin thin-walled photocells from outsidePair of infrared beam photocells consisting of receiver and transmitterWall-mounted or column-mounted installation. Model not built-inMinimal 2cm side footprint facilitates installation without the...
€ 89.00EUR
Tasty 6704
accessories
- STAINLESS STEEL Radio rolling coded 4 channels KEYPAD With this radio key pad you can open your gate from a distance of 30m by digiting a 4 digit secret combination
€ 139.00EUR
