HC619 SOLAR
Ideal for 2 wings swing gates up to 3m/10ft each wing
(total gate length up to 6m/20ft)
This classic DUCATI "vintage" design gate operator features SOLAR POWER power supply for 100% autonomous use.
Several advanced options combined with 600mm long stroke actuators for greater strength and less mechanical stress of the system.
in FC version also offer buit-in mechanical limit for gate open and closed position. Ideal where otherwise required end stop limits cannot be installed on the ground to set the gate open and closed position
LEARN MORE about reduced consumption technology....
LEARN MORE about our solar powered openers....
Ensures 100% autonomous use even where AC power is unavailable
Highly reliable as featured with Ducati's reduced consumption technology: with only 7mA stand-by consumption ensures long lasting performances in all weather condition. Ideal for residential use. Up to 50 cycles daily guaranteed . No additional modules requires: it's all included: on board solar panel & battery recharge management!
DUCO SAFE
obstacle detection safety system guarantees maximal safety of use to your family
SELF LOCK TECHNOLOGY
The self-locking properties of the spindle increase the protection against a dangerous and unauthorized “pressing” of the gate and the otherwise necessary e-locks for the final positions can be omitted. A massive 20 mm diameter three principle steel spindle made of PR80 steel ensures long and reliable operation
- 2x HC618- 600mm stroke electromechanical actuators supplied with 1 m outdoor use cable H05RN-F 2 x 1mmq
- set of actuator's fixing brackets
- 1x KONTROL 7857 large control box with electronic board CTH44, integrated solar panel and battery management, toroidal transformer, integrated radio receiver.Note: the control box is designed to be powered by solar panel, but can also be powered by main AC power mantaining wired the battery. the transformer is therefore supplied for Ac power supply wring if required by the customer for any reason and can also be used to recharge the battery
- 2x 6203Roll - 2 buttons 433,92 Mhz rolling code radio transmitters
- 1x HC7500 - blinking light 12V ( 24V for 24V variant)
- 1x SW5000 - key switch
- 1x key for manual emergency release
- 1x BAT0712 Battery 12V 7A
- 1x SOLAR1012 Solar photovoltaic panel 12V 10W with fixing bracket
- 1x instruction manual
- POWERFUL 600mm stroke electromechanical actuators
- Ideal for a safe, quick and easy installation: the system is electrocution risk-free.
- Low consumption technology: only 0,007A stand-by consumption! reduces waste of energy, save money Ensure long lasting autonomous use ad reliability. up to 40 daily cycles guaranteed even in worst winter weather.
- Integrated solar panel & battery management: the control board is ready to operate autonomously.
- Ideal for a safe, quick and easy installation: the system works in DC current and is electrocution risk-free.
- 2 working modes: "STEP by STEP" ( push to open & push to close) or Automatic close with adjustable time (you can vary the pause time from 1 to 100 seconds)
- Control unit with integrated battery housing compartment: can fit any 12v battery up to maximal dimension : 9cm x 15cm x 9,5cm h
- Easy self-storing of the remotes controls by pushing one button
- Adjustable motor power/ obstacle detection sensitibility. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.
- Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) this feature can be controlled by remote control
- Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
- After sale service and assistance provided directly by manufacturer without intermediaries in order to provide quick and immediate solution to any demand.
- The gate is automatically locked in closed position (irreversibile system).
- Manual release system by universal triangular key
- Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- CE conformity: product certified on all points of the current European regulations. Notify body as NEMKO / INTERTEK test reports & certificates available on request
- Totally in house designed software and hardware are focused on reduce energy consumption and with attention to the absolute reliability using innovative components of the latest generation as our High quality radio receiver hybrid
- Ducati chooses to use toroidal transformers only to achieve maximum reliability and safety by power surges and ESD. Our Standard 230V-50Hz transformer is also available in 110V/60Hz version.
- Integrated solar panel management: the card is a just ready to operate autonomously powered by solar panel. NOTE: For 12V version add a standard 12V battery + 1 x 12V min.10W solar panel. For 24V version add 2 x 12V batteries in series connected + 24V min. 20W solar panel. No extra module needed
- Low consumption technology: only 0,007A stand-by consumption for the 12V version and only 0,014A ! Protect the environment, reduces waste of energy and gives long lasting autonomy with battery /solar panel use
- Adjustable motor power/ obstacle detection sensitivity. By decreasing the power the gate opener will be more sensible in case of impact on an obstacle. The adjustment is very easy: just need to rotate potentiometer related to each motor.
- heavy duty opener: can work in continuous cycles without overheating
- Adjustment of the time lag between the two doors
- Pedestrian opening (1 partial opening of one wing to allow the pedestrian crossing) can be controlled by remote control or wired control.
- Made in Italy - All components are manufactured in the company to warranty high quality and reliability.
- After sale service and assistance provided directly by manufacturer without intermediaries
- Easy self-storing of the remotes controls by pushing one button
- Safety is ensured by an sensitive amperometrical obstacle detection system and pressure control. Photocells ( safety beans) are no longer mandatory. Photocells are an optional accessory that can be helpful to prevent scratches to the painting of vehicles left in the vicinity of a moving gate. (EN13241-1: 2003 + A1 ( April 2011 ) EN12453 : 2002 EN12445 : 2000)
- CE conformity: product certified on all points of the current European
ACTUATOR TECHNICAL DATA
ELECROMECHANICAL ACTUATOR HC618
|
|
dc motor | 60W |
max pushing & power | 1200N |
Stroke | 600mm |
motor speed | 1,5 cm/sec |
electromechanical actuator | √ |
working cycles limit | continuous use/ no limits |
working temperature | -20°C/+50°C |
max wing length | 3m/each leaf |
max.wing weight
|
300kg/ each leaf |
max. opening angle | 137° |
automatic wing lock | √ irreversible actuator |
manual release system | √ by triangular key |
Max "C" measure (see pillar installation diagram hereunder) to install the actuator avoiding any masonry work on the pillar | 23 cm |
Compatible with gate opening towards outside | √ |
NOTE: the actuator will stop by amperometric detection system: it therefore requires mechanical limits to be installed on the floor to stop the gate wing in the open and closed position. Special actuator model HC618 in "FC" version are featured with on-board mechanical limits for the open & closed wing position.
CTH44 ELECTRONIC BOARD TECHNICAL DATA
(solar panel & battery management on board)
|
|
toroidal transformer's Watts | 105W |
protection fuse | √10AF |
transformer protection fuse | 0,8AT (1,2AT for 110V transformer) |
use on single or double wing gate | √ |
output services | 12V |
stand-by power consumption | 7mA |
radio receiver | 2 channels (one for full cycle opening, the second for pedestrian access/partial 1 wing opening) |
remote controls channels storage capacity | 10 codes |
radio transmission protocol | DUCATI rolling code |
radio frequency | 433,92MHz |
remote control automatic learning | √ |
on board antenna | √ |
external antenna input | √ |
automatic closure working mode | √ with adjustable pause time up to 100 sec. |
step by step working | √ one pulse to open; one pulse to close |
motor power adjustment | √ by potentiometer |
Obstacle detection safety system (DUCO SAFE) | obstacle detection |
In compliance with EU-CE norms | √ |
timerized courtesy light output | - |
flashing light output | √ max. 10W 12V lamp. blinks quickly while closing, blinks slowly while opening |
electric lock output | - |
safety beam-photocells input (NC contact) | √ NC normally closed contact Note: use of special low consumption photocells is recommended: use only DUCATI low consumption photocells model 7120 |
A full cycle START input (NO contact) | √ |
pedestrian cycle START input ( N contact) | - |
CLICK HERE to download the HC618 actuator's installation diagram
CLICK HERE to download the CTH44 electronic board wiring diagram
CTH 44 VIDEO installation manual
CLICK HERE to download full swing gate openers installation manual
Customer Reviews
LASER 100
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- Universal model Also called Photo Eye Sensor / Photocells Compatibility : Universal model Sensing range: 12 m
LASER 7120
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- This model features Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances
RIXY 6040 R
accessories
- Rolling Coded 4 channels radio receiver
- Storage capacity up to 30 remote controls buttons each channel for a total storage capacity of 100 remote controls
STILO 6023
accessories
Universal external antenna 433,92 MHz To be installed directly on FLASH blinkers Comes with cable Improves the reception of the command transmitted from the remote control. It's recommended in case the...
SW 7120
accessories
- Pair of Photoelectric SAFETY BEAM PHOTOELECTRIC SENSORS
- This model features Low consumption and is specifically developed to be used on solar powered openers without compromising their autonomy and ensuring long lasting performances